JBL RM10II

89.50 

SKU: 20149713357 Categoría: Etiqueta:

Descripción

JBL RM10II

ROCK MONITOR SPEAKER

The RM10 monitor is equipped with left and right high-frequency trim controls that control the tweeters in the left and right side panels of each RM10 speaker. The trim controls enable you to compensate for various room conditions and vocal styles.

Begin by turning the knobs in the center of each control as far counterclockwise as they will go. This is the normal level of the associated high-frequency driver. Turning the knob clockwise decreases the driver’s level. Adjust the trim controls so that the vocals are loud enough to be intelligible without being so loud as to be harsh or distorted.

JBL RM10II

JBL RM10II

JBL RM10II

JBL RM10II

SPECIFICATIONS

Description 3-Speaker, 2-way 10″ (250mm) vocal monitor
Maximum Recommended Amplifier Power* 175W
Power Handling (Continuous/Peak) 50W/400W
Nominal Impedance 8 Ohms
Sensitivity (2.83V/1m) 92dB
Frequency Response (-3dB) 40Hz – 20kHz
Crossover Frequency 1,700Hz
High-Frequency Transducers Dual 3″ (75mm) cones with high-temperature voice coils
Low-Frequency Transducer 10″ (250mm) Cone with high-temperature
  voice coil, shielded
Baffle Low diffraction, IsoPower”
Ports Dual FreeFlow™ flared
Network Straight-Line Signal Path™ (SSP™)
  with left and right high-frequency trim controls
Terminals Gold-plated, 5-way binding posts
Dimensions (H x W x D) 13-3/16″ x 20-7/8″ x 9-5/8″ (335mm x 530mm x 245mm)
Weight per Speaker 29.7 lb/13.5kg